How do I a seal large opening where patio door used to be but will now be where air conditioner will be? - used patio furniture
We are trying to escape the heat, so I bought an air conditioner.
Would cardboard and duct tape? Plastic bags and duct tape? A moss and if so, how? Wood? How high would you estimate your costs for the solution? I do not want to spend over $ 100. This is the easy to remove and replace? Thank you!
Wednesday, January 6, 2010
Used Patio Furniture How Do I A Seal Large Opening Where Patio Door Used To Be But Will Now Be Where Air Conditioner Will Be?
8 comments:
I recommend, not by the air conditioner through the patio door because it covers too much space. You do not have a window on another wall is the A / C to activate? If you really want to quit, you need to build the wall with the 2x4 and drywall again. I think he does not want to work the door to keep. If the door can not always be as I say, bet, and put a window so that the AC / she is independent though about $ 100. The board does not protect from the rain when it happens, rain, and niether is plastic. If you're one of them share, you have your home look trashy. The same applies to the foam, but may work better. My suggestion is to get a piece of wood or cardboard and nails of platelets on their wall. It's still probably sound too funny, but it is more durable than plastic or foam. I do not know how, but if you go buy what you decide, ask the guys at the hardware store or woodworking. You may have better ideas.
I agree with paul express. Use 2x4 and plywood and to observe all that can with screws, you will descend when the summer ends. If you have a deficit in the window in this room to install the device through the wall, might be a good permanent solution.
Deliveries are so fast through the roof. Situation is similar to a customer wants a door dogie then add to enhance local habitats and the purchase of a similar panel will be built only one other application. the use of plywood in the track to the door and tape explaining cracks.its easier to install. Costs, CDX plywood and use maybe a couple of 2x4 and I prepared using screws 18.00-5.00-6.00-4.00
Deliveries are so fast through the roof. Situation is similar to a customer wants a door dogie then add to enhance local habitats and the purchase of a similar panel will be built only one other application. the use of plywood in the track to the door and tape explaining cracks.its easier to install. Costs, CDX plywood and use maybe a couple of 2x4 and I prepared using screws 18.00-5.00-6.00-4.00
if you stand with insert from Brown
1 x 8ft 2x4 or 2x6 depending on the thickness of the wall and the hole in the wall is apprpriate and build a framework for unity
Since the winter so you can use the wall u PICE, in order to make the hole for the winter seal
Costs about 20 to $ 30
You want to avoid the problem, open the door as wide as the industry should then block the exit so that you can move in both directions. Pin by drilling a hole in the outer rim of the cup, pin intact. to hold the door.
Built AA 2x4 short wall above the height of a window sign inside contact, plywood and paint, if desired. Put the AC in the upper wall and corset in the back, so it costs a little, but not much, is a drop of water is released into the engine and evaporated by the heat.
2. CA to another wall opening and plywood, has mounted a little about how the walls come together, to some of the aluminum door and side panels frame space to think.
You want to avoid the problem, open the door as wide as the industry should then block the exit so that you can move in both directions. Pin by drilling a hole in the outer rim of the cup, pin intact. to hold the door.
Built AA 2x4 short wall above the height of a window sign inside contact, plywood and paint, if desired. Put the AC in the upper wall and corset in the back, so it costs a little, but not much, is a drop of water is released into the engine and evaporated by the heat.
2. CA to another wall opening and plywood, has mounted a little about how the walls come together, to some of the aluminum door and side panels frame space to think.
Go get some plywood and 2x4. Marco and make brackets for A / C unit. This should cost under $ 100. and help secure at home. Forget about using foam, tape or plastic, for an opening so large that you need to frame and sheath.
Post a Comment